Woodworker's Journal 2004 Spring, страница 30

Position against fence Blade _?

GO

o"

CD

Place top of apron here.

Jig 1

First cut for apron

Blade is set at 45"

Place bottom of apron here.

CD

Position against fence Blade

Place bottom of apron here.

Jig 2

Second cut for apron

Place previously / cut edge here.

Blade is set at 45°.

Place top of apron here.

Note: Cleat Is glued on flush with edge.

Apron Jigs

Use the pattern above to create the t\ jigs (14" x 8" overall) at left.

Step 1: Cut the pattern out, leaving th waste at both edges, and lay out the . decorative mortise locations directly c the aprons.

Step 2: Trim the waste off the right sic the pattern and position the pattern a your Jig 1 blank. Line up the right edc the pattern with the right edge of the blank and trace around the pattern. U jigsaw to create the opening.

Step 3: Trim the waste off the left side the pattern, rotate the pattern 180° an position it on your Jig 2 blank. Line up freshly cut edge with the right edge o blank and trace around the pattern. Li jigsaw to create the opening. As show left, Jig 2 also receives a cleat to prev your apron from riding up during the c

3 ? 5 Sj

CO

3"

fc $ CD Qj =* <D

3" <D 5" rs..

<o CD o (a CD to 5>" ■v